Anker Balcony Solar: Specs, US Availability and What to Check

Anker balcony solar is a European product line: SOLIX Solarbank batteries and a balcony system built around the MI80 microinverter, designed for 230 V, 50 Hz grids. As of November 3, 2026, Anker’s US SOLIX store lists portable power stations, home backup systems and solar panels, but no grid-tied plug-in kit. European units do not meet US plug-in laws, which require a certified 120 V device.

What Anker sells as balcony solar

Anker’s balcony solar range in Europe has two building blocks. The first is a microinverter kit: panels connect to the Anker SOLIX MI80 microinverter, which plugs into a household outlet. The second is the Solarbank, a battery unit that sits between the panels and the outlet, stores midday surplus and feeds it to the home later, within the output limit that applies in each country.

The figures below come from Anker’s published European material: the Solarbank 3 E2700 Pro data sheet and Anker’s European balcony system page, both accessed on November 3, 2026. We have not tested either product.

Solarbank 3 E2700 Pro, published specifications

Table scrolls sideways

The data sheet notes that specifications may change without notice. Its storage figure is for the main unit; Anker sells the BP2700 expansion battery separately to add capacity.

Balcony solar system with the MI80 microinverter

Anker’s European balcony system page describes the MI80 microinverter as a 600 W unit that can be upgraded to 800 W through the app, with two MPPT connectors that accept up to 600 W of panels each and an IP67 rating. It pairs with Anker’s RS40 and RS40P panels, which Anker describes by power per square meter rather than by panel wattage. Some passages on the page refer to a German rule change that has since happened, which suggests the page has not been updated recently.

Is Anker balcony solar available in the US?

Not from Anker directly, as of November 3, 2026. Anker’s US SOLIX store lists portable power stations such as the S5000, F3800 Plus and C1000, the E10 whole-home backup system, portable and rigid solar panels and expansion batteries. It lists no Solarbank, no MI80 microinverter and no product described as balcony or plug-in solar. We found no announcement from Anker of a US plug-in product.

If a marketplace seller in the US offers an Anker Solarbank or balcony kit, it does not come from Anker’s US store. Ask the seller which model it is, which voltage it is built for and which US certification it carries, for the reasons in the next section.

Why a European Anker kit does not belong on a US outlet

Table scrolls sideways

The electrical mismatch is decisive on its own: a 230 V, 50 Hz inverter cannot synchronize with a 120 V, 60 Hz US circuit, and adapters do not change that. The certification mismatch is the legal one. Utah’s law and the laws that followed it require certification by a recognized laboratory; Virginia’s, for example, also requires compliance with the current National Electrical Code and a feature that stops the device from feeding the building during an outage. UL Solutions launched certification to UL 3700, the standard written for plug-in systems, in January 2026. European approvals do not substitute for it.

Our overview of plug-in solar laws by state lists what each state requires, and our guide to plug-in solar inverters explains listings.

What Anker sells in the US instead

Anker’s US range is built around portable power stations and home backup. A power station is a battery with its own inverter and outlets. It charges from the wall or from solar panels and powers devices plugged into it. It never feeds power into your home’s wiring or the grid, so no interconnection rules or plug-in laws apply.

That makes a power station with panels a legal way to use solar at home in every state, including those without a plug-in law. It differs from a balcony kit in three ways:

• It is manual. You plug devices into the power station rather than having the whole apartment draw from the panels automatically.
• It loses energy. Every kilowatt-hour passes through the battery, which costs a few percent in each direction.
• It costs more per kilowatt-hour. The battery is the expensive part, and it is used every day.

Its advantage is backup: it keeps a refrigerator, a router or medical devices running during an outage, which a grid-tied plug-in kit cannot do. Do not connect a power station to your home’s wiring through an outlet; feeding a building without a transfer switch endangers line crews, and the larger home backup systems are installed by electricians for that reason.

How Anker’s specifications compare on paper

Compared with the US plug-in kits on the market in 2026, the European Solarbank is a large battery unit. US kits with batteries typically pair 800 to 1,200 W of panels with roughly 1 to 2 kWh of storage, according to our cost and savings guide. The Solarbank 3 E2700 Pro’s 2,688 Wh and 3,600 W of solar input are sized for European households that use a larger share of their output at home and can add expansion batteries.

Its 800 W grid output reflects the European limit, which is lower than the 1,200 W most US state laws allow. A US version, if one ever appears, would need a different inverter, 120 V output and US certification, so its specifications could differ substantially from the European model.

If Anker launches a US plug-in kit

Next steps

• Plug-in solar panels for home: sizes and setups
• The Enphase IQ balcony solar kit explained
• Plug-in solar laws by state